No Products in your bag
Use WAVE™ pH Increaser to raise the pH of the swimming pool and spa water. The pH of the water should be correctly maintained to ensure bather comfort and the protection of the pool or spa and its equipment.
Dose Rate 100g of WAVE™ pH Increaser per 10 cubic metres of water.
Application
Ideally the pH of the water should be maintained around 7.4. If the pH falls to, or below 7.2, add WAVE™ PH Increaser into 10 litres of fresh water, using a clean plastic container and mix carefully. Slowly pour the solution into the pool or spa water dose to the return inlets and rinse out the container thoroughly.
After 24 hours, recheck the pH and repeat the treatment dose as necessary.
| Pre Order: | Dates for delivery are shown on all products in the description |
| Small Items: | Cost £3.99 and are shipped with either DPD or RoyalMail (48 Hour) service. |
| Large Items: | £4.99 shipped via DPD (Next Day) - Order by 3PM |
| Saturday Delivery: | £9.99 shipped with DPD (Saturday Service) - Order by 3PM |
